QuikRuler
9
Relocating the Menu while
Working with QuikRuler
You can change the location of the menu at any
time while working with QuikRuler:
• Select
• Put the menu where you want it to be and tape
it down.
• QuikRuler prompts you to
Select Left Pnt
• Press the stylus on the left menu point.
• QuikRuler prompts you to
Select Right Pnt
• Press the stylus on the right menu point.
See the previous page for an illustration of the
left and right menu points.
If You Lose the Menu Location
Sometimes you might move the menu without
first telling QuikRuler that you want to relocate it.
Don't panic! Instead:
• Tape the menu down where you want it to be.
• Disconnect the power supply.
• Reconnect the power supply and listen for four
beeps.
• When QuikRuler displays
Press Switch to
Relocate Menu...
press the stylus tip anywhere to enter the
relocate mode.
• Follow the prompts that QuikRuler shows you
to select the left and right points. See the
previous sections for details.
Configuring
53-00039 C.p65
10/4/00, 11:54 AM
11