DrawingBoard VI 29
To replace the batteries:
1.
Unscrew the pen cap. Hold the
pen from the bottom and gently
slide off the pen cover to expose
the batteries.
2.
Remove the old batteries by
turning the pen over and gently
tapping it, letting the batteries fall
into your other hand.
3.
Insert the new batteries as they
are shown in the figure above (+
towards pen tip).
4.
Replace the pen cover and screw
the pen cap onto the pen.
Replacing the Cordless Cursor Batteries
The cordless cursor requires two AAA batteries. The average battery life for the cursor is 2,000
hours.
To replace the batteries:
1.
Place the cursor face down in the palm of your hand. Use a Phillips screwdriver to
remove the two screws located on the bottom of the cursor (see figure). Remove the
cursor base.
2.
Remove the old batteries from the battery casings.
3.
Place the new batteries in the casings, matching the polarity of each battery with the
markings on the connector strips (match + to +).
4.
Reposition the cursor base. Replace the screws with the Phillips screwdriver.
Summary of Contents for DrawingBoard VI
Page 17: ...DrawingBoard VI 17 Setting up format ...
Page 21: ...DrawingBoard VI 21 ...
Page 22: ...DrawingBoard VI 22 ...
Page 23: ...DrawingBoard VI 23 ...
