9
The DrawingBoard V
Pens
Each pen is similar in appearance to a ballpoint pen. The pen transducer
has three buttons, two on the side of the barrel and one in the pen tip.
Three different types of pens are identified by a colored ring on the pen
barrel—the
Click Tip
has a light blue ring; the
Pressure Tip
, a black ring;
and the
Lite Touch Tip
, a red ring.
Installation
Preparing the DrawingBoard V
Mounting on the Stand
You can place your DrawingBoard V on a table, desk, or drafting table.
Or, you can mount your DrawingBoard V on a stand or a pedestal. The
tablet’s Universal Mounting Brackets attach directly to those stands that
have
tilt arms
. Stands with
tilt pads
require right-angle mounting brackets,
which are attached to the tilt pads. The tablet’s Universal Mounting
Brackets are then attached to the right-angle mounting brackets. Center
the tablet over the attached Universal Mounting Brackets and screw the
Thumbscrews into the T-Nuts in the mounting channel in the tablet’s
frame.
Attaching the Accessory Tray or Optional Plan Holder
Additional T-Nuts have been included in the perimeter mounting channels
on the DrawingBoard V frame. You can position the Plan Holder or
Accessory Tray where it is most convenient for you by attaching it to any
one of the available T-Nuts. The following instructions and the graphic
below detail the installation of the Accessory Tray.
Simply slide the Tray Rails into the channel and line up the hole in the tray
with the hole in the T-Nut. Tighten the Thumbscrew to secure the Acces-
sory Tray.
Accessory
Tray
Thumbscrew
T-Nut
Tray Rails
DrawingBoard V
Frame
Setting Up Your DrawingBoard V
The instructions below describe how to set up your DrawingBoard V.
Before you begin, please take a moment to fill out and mail the Warranty
Registration Card.
