- 31 -
- 31 -
Displaying the output data rate
In this menu the current data rate is displayed.
Saving settings
• Press the
M
button.
—> The settings are saved.
—> You will be returned to the “Selecting the cassette”
menu item via connection
A
(page 16).
—> By pressing the
button, you will be re-
turned to the menu item “Setting the Ethernet pa-
rameters” “
ETHERNET
” via connection
B
without
saving the programmed data (page 17).
5.2.1 Operation with a CA module
In order for this function of the CA module to be possible, in
the “Selecting the input transport stream” – “
INPUT
” menu
(page 20) an input signal source must be selected whose
transport stream contains services which can be decoded by
the CA module you are using and your smart card. Where
both encrypted and unencrypted services are transmitted,
short-term picture loss may occur when switching between
encrypted and unencrypted services.
Setting the operating voltage for the CA module
In this menu the operating voltage for the CA module can
be set.
A
M
B
Bx 4
72.956 Mbps
DATARATE
Bx 4A
Supply
CA
5.0 V
3.3 V / 5.0 V
C
