GSS PTIS Assembly Instructions Manual Download Page 29

Page: 29 / 36

- 29 -

If the service selected is already allocated to an IP address,
in the first line of the display an exclamation mark ”

” ap-

pears beside the type of the service.

If no service is found the display shows “

– – –

”. In this case

check the configuration of the antenna system including the
head-end station and the previous settings of the cassette as
well as the components connected to the ASI input.

• Press the

button.

—> The “Selecting the sound options of the service” –

“

AUDIO

” menu is activated.

Selecting the sound options of the service

If several sound options in different languages, Dual sound
(“

2ch

”) or AC3 are transmitted in a service, you can select

the desired audio stream from the transport stream in this
menu.

• Press

to select the desired sound option (e.g. ”

all

”,

”

deu

” – German, ”

2ch

” etc.).

• Press the

button.

—> The “Switching DVB service information on or off” –

“

OPTIONS

” menu is activated.

001/016

IP 1

TV !

Das Erste

all / 01/…

IP 1

all

AUDIO

Summary of Contents for PTIS





































Search results

Summary of Contents for PTIS

Reviews:

Related manuals for PTIS

Brands by name

Popular brands

GSS PTIS, Assembly Instructions Manual

Search results

Summary of Contents for PTIS

Reviews:

Related manuals for PTIS

Brands by name

Popular brands