GSS PTIS Assembly Instructions Manual Download Page 35

Page: 35 / 36

- 35 -

Further possible terms displayed:

“

”

– ”Radio” (type of the service)

“

” –

The currently selected service is

encrypted.

• Use the

▶

◀

buttons to call up the services in sequential

order which are to be decoded, then use

to decrypt

(“

”) or not to decrypt them (“

”).

• Save changes and activate the filter:
Press

the

button.

—> The filter is activated. The display shows the

“Configuring the CA module” – “

” menu.

• Press the

button.

—> The “Selecting the input transport stream” – “

INPUT

”

menu is activated (page 20).

—> Set channel strip ”

Tuner B

” if necessary.

6 Final

procedures

After installing the head-end station, upgrading accessories or installing
cassettes it is necessary to tighten all cable connections, cable terminals and
cover screws in order to maintain compliance with current EMC regulations
securely.

• Securely tighten the cable bolted connections fingertight using an appropriate

open-ended spanner.

• Mount the front cover (s. assembly instructions of the head-end station).

next service

Bx 4A

Menu <=

=> Edit

Summary of Contents for PTIS





































Search results

Summary of Contents for PTIS

Reviews:

Related manuals for PTIS

Brands by name

Popular brands

GSS PTIS, Assembly Instructions Manual

Search results

Summary of Contents for PTIS

Reviews:

Related manuals for PTIS

Brands by name

Popular brands