- 23 -
PTIS 1000
Allocating the IP addresses
In this menu up to 16 services that are contained in the data streams of the in
-
put source signals ("
Tuner A
", "
Tuner B
", "
ASI
") can be accessed. The services
detected receive an IP address automatically.
In the following sub-menus you can set specific parameters for each service.
Bx 4
Das Erste
IP-OUT 1
=>
• Press the
buttons to select the IP outputs to be set ("
IP-OUT 1
" … "
IP-
OUT 16
").
—> In the second line of the display the service is indicated allocated to the
IP output (e.g. "
Das Erste
").
—> If no service is found or allocated the display shows "
– – –
" instead of the
name of the service.
• Press the
button.
—>
The "Switching the IP address off or on", "Selecting the transmission proto
-
col", "Setting the port number" –
"
MODE / PORT
" menu is activated.
Switching the IP address off or on
Selecting the transmission protocol
Setting the port number
In this menu you can switch off the IP address displayed, and define the trans
-
mission protocol and the port number.
Bx 4A
on UDP
MODE/PORT
1234
Switching the IP address off or on
• Press the
buttons to switch off ("
off
") or ("
on
") the output IP address
and the service referred.
—> In the second line of the "
IP-OUT …
" menu "
off
" is displayed instead of
the service referred.