- 21 -
PTIS 1000
Setting the input channel
Once the HF receiver has synchronised to the input signal, "
OK
" is displayed.
If "
– –
" appears in the second line of the display, there is no input signal
present. Check the configuration of the antenna system and the head-end sta-
tion as well as the preceding settings of the cassette.
Bx 4A
C30 (546.0)
INPUT
OK
• Use the
buttons to set the desired input channel.
—> Beside the input channel set the relevant input frequency is displayed.
• If necessary use the
button to activate the menu item "Fine tuning".
—> "
0
" is displayed instead of the frequency display.
Bx 4A
C30
0
INPUT
OK
-64…+64
• Use
for fine tuning the input channel ("
-64
"
…
"
+64
").
In addition to the indicator in the display, there is also a status LED which indi
-
cates whether a transport stream is received or not:
LED indicator
Indication
Green
Signal available
Red
No signal
• Press the
button.
—> The menu "Setting the hierarchical modulation" – "
INPUT Priority:
" is
activated.
Status LED
Channel strip "B"
Status LED
Channel strip "A"