manualshive.com logo in svg

GSS PTIS 1000, Assembly Instructions Manual, Page: 19 / 35

Share
Download
GSS PTIS 1000 Assembly Instructions Manual Download Page 19

 

 

- 19 - 

PTIS 1000

 

Setting the address range

 

In this menu you define the address range for the cassettes connected to the 
LAN network.

Bx 4
255.255.255. 

0

IP-MASK

 

•  Use the

 

 buttons to place the cursor under the digit of the IP address 

displayed to be set and use 

 to set the IP address wished.

 

•  Press the 

 button.

 

—>  The "Setting the address of the gateway" – "

IP-GATEWAY

" menu is acti-

vated.

 

Setting the address of the gateway

 

The IP address of a gateway (server) can be set in this menu. If no gateway is 
used you can skip this setting.

Bx 4
192.168. 

0. 

1

IP-GATEWAY

 

•  Use the

 

 buttons to place the cursor under the digit of the IP address 

displayed to be set and use 

 to set the IP address wished.

 

•  Press the 

 button.

 

—>  The "Setting the UDP port" – "

UDP-PORT

" menu is activated.

 

Setting the UDP port

 

The UDP port setting is required if the cassette needs to be reached externally 
to make the setting, such as from another input frequency. This setting is in-
tended for future functions and can be skipped for this cassette. 

Bx 4
60000

UDP-PORT

Summary of Contents for PTIS 1000




































Reviews:

No comments