Chapter 6: Installing Winding Bin Stairs (Intermediate to Bin Bottom)
Installing the Sidewall Attachment bracket to the Bottom Ring
Align and install the bottom sidewall attachment bracket assembly (Y) on the sidewall in the horizon-
tal seam (K) using standard bin bolts (b) and flange nuts (C).
NOTE:
• Align the second hole (X) from the top and the last hole of the bottom sidewall attach-
ment bracket assembly (Y) with the top (D) and bottom (E) holes in the horizontal seam
(K) of the bottom ring (Z).
• Install the bottom sidewall attachment bracket assembly (Y) with a hole to hole gap (V)
of 46.875 in.
• The bolts must be installed with the bolt head on the inside of the bin.
Figure 6-2
Installing the sidewall attachment bracket to the bottom ring
B
Standard bin bolt with sealing washer
U
Sidewall attachment bracket assembly
C
Flange nut
V
46.875 in.
D
Top hole in horizontal seam
X
Second hole from top
E
Bottom hole in horizontal seam
Y
Bottom sidewall attachment bracket
assembly
K
Horizontal Seam
Z
Bottom ring
NOTE:
If the bin has a rolled lip instead of the base angle, then the sidewall attachment bracket will need
to be field cut to allow the bracket to mount against the bin wall.
PNEG-2077
TopDry – Platforms and Bin Stairs
69