13
V. MAINTENANCE AND REPAIR
DANGER
FAILURE TO OBSERVE ALL SAFETY RULES, WRITTEN AND IMPLIED, AND THOSE
SUGGESTED BY COMMON SENSE, CAN RESULT IN DEATH, SERIOUS INJURY, AND /OR
EQUIPMENT DAMAGE. LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
5.1 General Maintenance
A good maintenance program involves thorough general housekeeping, adequate periodic re-lubrication, and
replacement of worn or damaged components.
5.2 Periodic Inspection
At regularly scheduled intervals, while observing all safety precautions, observe the sampler as it operates.
Inspect for:
A. Loose or missing hardware
B. Noisy motor or motor/reducer bearings
C. Overheated motor or reducer
D. Adequate lubricant in gear reducer
E. Loose drive chain
F. Structural damage
G. Rust or corrosion
H. Damaged wiring, including exposed conductors and connections
I. Make sure that all guards are in place and that all warning labels are in place and legible. Section
I, GENERAL SAFETY INFORMATION, explains the purpose and intended location of the warning
signs. Warning signs are an important part of any safety program; replace any missing signs
IMMEDIATELY!
