The Corti will search for the paired printer showing Display 14
while
searching. When the printer is found, all test results stored in memory
will print out automatically.
The Corti instrument will power off when printing is complete.
NOTE:
All printed test results are marked for deletion, but will
continue to be stored in memory until a new test is started at which
time all tests in the memory will be erased. This allows the user to
reprint the tests if printing is unsuccessful (for example the paper runs
out before printing is complete).
Connecting to the Corti Data Manager
For the PC to Corti connection, plug the USB-A connector into an
available USB port on the computer and the Micro-USB of the cable
into the port found at the base of the Corti instrument (see
Figure 2).
For the PC to Corti Cradle connection, plug the USB-A of the cable
into a computer USB port and the USB-B connection to the back port
of the Cradle. Note the Cradle does not need to be charging the Corti
unit to transfer data.
For the PC to Corti wireless connection, make sure the Corti is paired
to the PC. From the main screen press the up arrow. Press the left or
right arrows at
CONNECT
for data transfer
.
The Corti instrument will display “Waiting on PC”, detect the
connection to the PC and wait for an action or communication from
the Corti Data Manager. Refer to the Data Manager User manual for
detailed operation.
NOTE:
See the Corti Data Manager Manual for instructions on using
the application.
NOTE:
Corti must be in the main menu screen (Display 1) to
communicate with the PC
Display 14
