GSi 24' Gamma, Installation Manual

Page: 31 / 40

4. Roof Assembly
PNEG-2262 24' Diameter Gamma Roof Assembly Instructions 31
Figure 4S Installing the Roof Panels
4. After the initial roof panels (1) are installed, fill in the exposed gaps (2). Working in a
counter-clockwise direction, install two additional roof panels (as shown in Figure 4S ), overlapping
each roof panel (1) on the left. Adjust the roof panels (1) as needed.
IMPORTANT: You will need to tuck one roof panel per gap under the previously installed roof panel,
by slightly lifting the upper rib (9) of the previously installed panel and allowing the and
lower rib (10) of the new roof panel to be tucked under.
Figure 4T Installing the Roof Panels into Exposed Gaps
Ref # Part # Description Ref # Part # Description
1 CTR-0382 Roof Panel 5
CTR-1198
CTR-1201
Eave Clip
2 Exposed Gap 6 CTR-1183 Intermediate Eave Angle
3 CRP-6092 Peak Ring Attach Clip 7 S-10260 5/16" x 1" Flange Bolt with Sealing Washer
4 CRP-7341 Roof Rafter 8 S-3611 5/16" Flange Nut
Ref # Part # Description Ref # Part # Description
1 CTR-0382 Roof Panel 8 S-3611 5/16" Flange Nut
2 Exposed Gap 9 Upper Rib
7 S-10260 5/16" x 1" Flange Bolt with Sealing Washer 10 Lower Rib
2
8
7
7
8
1 9
10