24
PNEG-1020 Bin Sweep Auger
10" Bin Sweep Assembly & Installation
5.5 Install the Bearing Bracket
1. Place the hanger bearing bracket onto
the connecting stub.
Figure 5.5-A
5.6 Install the Sweep Flighting
1. Install the next section of flighting. Secure
the flighting with bolts, lock washers and
nuts.
Figure 5.6-A
5.7 Install the Flighting Shield
1. Install the smallest shield to the shield
mounting bracket located on the motor
mount assembly. Secure using two (2) 3/
8" x 3" bolts and lock nuts. Make sure the
nut is on the side of the slotted hole for
adjustment.
Figure 5.7-A
2. Install the first and second section of
flighting shield to the hanger bearing
bracket (when applicable). Use two (2)
3/8" x 3" bolts, lock washers and nuts to
secure these together.
Figure 5.7-B
Bearing
Bracket
Flighting
