GSI Group 890-00584, Installation And Configuration Manual

Page: 86 / 120

Chapter 12: Configuring an Intrusion Zone
NOTE: The phone numbers and phone groups must first be entered in the system menu.
1. In edit mode, under the Action tab of the zone you are configuring, click on the edit field next to the
telephone icon .
2. Click in the box to the left the contact person or group you would like to be notified in the event of an
alert in the given zone.
After You Finish
Make sure to record the message you want your system to play when calling.
Receiving an E-mail When an Alert is Active
When an alert is present in a zone, the system sends the assigned contact group an e-mail to inform them
of the situation. Receiving an e-mail when an alert is activated allows you to be alerted even when you are
on the phone or out of the country.
Before You Begin
NOTE: E-mail addresses but first be entered in the Menu→System→Contacts to be available for
selection.
1. In edit mode, under the Action tab of the zone you are configuring, click on the edit field next to the
e-mail icon .
2. Choose the e-mail addresses to contact from the list.
Enabling the Siren
If you install a siren, you can chose to make it sound or not when an alert is set off in a zone.
Before You Begin
NOTE: A siren must be installed and connected to your system for this feature to work.
In edit mode, under the Action tab of the zone you are configuring, click on the edit field next to siren
icon .
A check mark indicates the siren is enabled.
Enabling the Internal Speaker
The internal speaker allows you to hear the alert messages from the system when you are near the main
system.
In edit mode, under the Action tab of the zone you are configuring, click on the edit field next to the
speaker icon .
A check mark indicates the internal speaker is enabled.
86 895-00677 Agri Alert 128 Touch