Chapter 12: Configuring an Intrusion Zone
Selecting an Input
1. In edit mode, under the
General
tab, click on the
Input
edit field to display the selection box.
2. Select the input from the list.
Selecting a Zone Type
Selecting a zone type allows the system to properly interpret the data received from the selected input
What You Should Know
IMPORTANT:
The selected zone type must correspond to the type of sensor associated with the input you
selected.
1. In edit mode, under the
General
tab, click on the
Type
edit field to display the selection box.
2. Select a zone type from the list. Once a zone type has been selected, the configuration page displays
the appropriate settings.
NOTE:
The outdoor temperature zone type is not available if it has already been assigned to a zone.
Choosing the Type of End of Line Resistor
When configuring a zone using end of line resistors, you must choose the type of end of line resistors used
in your installation for the zone you are configuring to ensure data accuracy.
1. In edit mode, under the
General
tab, click on the edit field next to
EOLR
.
2. Select the type of resistor you are using.
Selecting the Type of Contact in the Dry Contact Zone
1. In edit mode, under the
General
tab, click on the edit field next to the
Contact
button.
2. Select the contact type used for the zone.
Providing Enough Time to Disarm After Entry
To avoid an alert being set off when you enter the building, provide enough time to access the system and
disarm before an alert is set off.
Before You Begin
Attention
Only the entry zones can have an
Entry delay
. You must click on the
Entry zone
button to make the zone
an entry zone to have access to the field.
What You Should Know
NOTE:
Only zones configured as intrusion zones can be disarmed.
1. In edit mode, under the
General
tab, Click on the edit field next to the
Entry delay
button.
2. Enter the amount of time needed to reach and disarm the system when entering the building.
84
895-00677
Agri Alert 128 Touch
Summary of Contents for 890-00584
