Exploded V i e w w i t h Key Numbers
Center Spur Gear: Slide the bearing over the output shaft of the center spur gear. Apply a light coat of
grease to the male portion of the long center diff out drive and insert it through the spur gear. Apply a very
light coat of grease to the o-ring, then slide it over the shaft of the out drive and seat it in the spur gear.
Slide the shim on the shaft and over the o-ring. Insert the pin through the hole in the shaft of the out drive.
Check to make sure the out drive rotates freely. If it does not, make sure the o-ring is properly seated
and/or apply more grease to the o-ring. Slide the large bevel gear over the pin.
ASSEMBLED VIEW
