Exploded V i e w w i t h Key Numbers
Body: Trim excess lexan from the body, following the cut lines. If you are not sure about where to cut at any time,
place the body over the buggy to double check. You will also need to cut holes for the fuel tank, engine, exhaust,
and antenna tube. It is always a good idea to place the body over the buggy before cutting the body mount holes.
Wash the inside of the body with mild soap and water, then rinse out and dry thoroughly. Apply the window. masks.
Mask the inside of the body in any pattern or design you wish. Paint beginning with the darkest color first. If using
spray cans, spray three light coats. Follow the paint manufacturer's guidelines for safe and proper use of paint.
Allow for paint to dry, and remove window masks. Peel off protective outside film, apply decals, and attach body
using body pins. Good luck racing!
