Front Upper Arms: The front upper left and right arms on the STORM CL-1 are not identical and can
not be used on either side. Insert the front shock tower inserts, circle side middle, into the front shock
tower. We suggest using the key No. 32 inserts. Slide the hinge pins into the front shock tower and slide
the upper arm assemblies over the hinge pins. Insert the front upper arm holder inserts, circle side
middle, into the front upper arm holder. We suggest using the key No. 32 inserts. Slide the holder, with
the inserts attached over the hinge pins.
Slide the pivot ball washers, cone side first, over the threaded portion of the pivot balls. Begin tightening the
pivot balls into the upper and lower arms. Rotate between the upper and lower pivot balls about every 3
turns, and make sure the dogbone ends of the front drive shafts enter the diff out drives. Tighten until the
washers are snug against the arm.
