background image

DISPLAY

The display indicates

ɳ

– when receiving FM stereo stations

Q R

– during station search, during fast cassette winding, 

during CD search function.

B

– during CD play and cassette playback forward.

A

– during cassette playback reverse.

– when the source TAPE is selected

– indicates the TAPE reverse mode:

å

The tape stops at the end of each side.

Playback (+ recording) of both cassette sides;  
after which the tape stops at the end of the second 
side.

Continuous playback of both cassette sides.

– during the recording function

– If the unit is optimally tuned to a radio station.

– when the source CD is selected

;

– when the system is in CD or TAPE PAUSE mode.

– when the sound is muted

kHz / MHz

– for FM reception the frequencies are indicated in 

MHz

and for MW reception in 

kHz

.

###########

– in this part of the display all relevant messages are 

displayed.

– indicates the output signal

REMOTE CONTROL

Changing the batteries

If the range of your infrared remote control seems to decrease, or if 
certain individual functions can no longer be carried out, you should 
replace the batteries.

Two mignon 1.5 Volt LR03 size AAA are required. 
To change the batteries, open the compartment on the back
of the remote control. 
Ensure that the batteries are inserted properly 
(note the markings in the compartment).

And in the interest of the environment: 
Remember that batteries must always be disposed of properly.

For functional overview of remote control see next pages

rec

rec

MHz

kHz

©

23

A SHORT OVERVIEW OF SPACE FIDELITY

GB

CD-COPY

RECORD

MEMORY

CANCEL

MODE

PTY

CD-COPY

RECORD

MEMORY

CANCEL

+

+

MODE

PTY

POWER

SOUND

CONTROL

SOUND

AUX

TAPE

TUNER

CD

DISC

POWER

SOUND

CONTROL

SOUND

AUX

TAPE

TUNER

CD

DISC

Summary of Contents for SPACE FIDELITY PA 3



















Reviews: