AUTO STORE FUNCTION
This tuner is equipped with a comfortable way to store all stations automatically.
• Select the desired waveband.
• Press and hold down
MEMORY
until the
frequency on the display starts running
and
AS
appears.
– The AUTO STORE function is started.
– The tuner will start searching from the actual frequency and stores, first of
all, all RDS stations that are not yet stored in the memory.
– Then it searches for the strongest non-RDS station and finally the weak ones.
– This function ensures you that all stations with an acceptable reception
quality are stored in your station memory.
• You can interrupt the AUTO STORE function by pressing
MEMORY
again.
CALLING UP A STORED STATION
• When you want to call up a stored station, press
3
or
4
. The stations are
called up in ascending or descending order.
– The display shows the selected memory
location number on the left, and the unit
switches to this memory location.
It is not possible to select a memory location
which has not (yet) been assigned to a
station.
Example:
Memory location 6 is not assigned to a station.
If you are situated at memory location number 5 and press once
3
the unit will
jump to memory location 7 (provided this location has been assigned to a
station).
DELETING A MEMORY LOCATION
• If you want to delete a memory location to which a station is assigned, first
call up its number.
• Press
3
or
4
until you reach the station you want to delete.
• Press
CANCEL
.
– The memory location is deleted, and the memory location number does not
light up on the display anymore.
• Hold
CANCEL
down for 5 seconds if you want to delete all the memory
locations, for example after you move to another location.
– '
ERASE
?
' appears briefly on the display.
• Keep the key depressed for an additional 5 seconds until the display shows
'
87
.
5
MHz
'.
– the station memory is deleted.
• If you now press one of the
3
or
4
keys, 'FREE' is shown on the display.
• If you release the
CANCEL
key before these 5 seconds have elapsed, the
erase function is not carried out.
RDS RADIO DATA SYSTEM
Your unit is capable of receiving and evaluating RDS information which is
broadcast along with the normal broadcast signal. The channel name is
displayed and automatically stored in the unit´s memory, overwriting names
previously stored.
RDS TIME
Some RDS stations broadcast the 'RDS-TIME' information.
• You can call up the time display by pressing the
Ǻ
key until the 'RDS-TIME'
display appears.
– The time display is updated every minute.
The accuracy of the time depends on the broadcasted information.
Note:
You will have to be tuned to the same RDS station for a few minutes
before you are able to call up the time.
RADIOTEXT
Some RDS stations broadcast RADIOTEXT, which is additional information on
the station and programme being broadcast.
RADIOTEXT information appears as "running" text in the display.
RADIOTEXT is transmitted character-by-character by the radio station. As a
result of that it may take some time until the entire text has been completely
received.
• RADIOTEXT is called up by continuously pressing the
Ǻ
key until the running
text of the RADIOTEXT signal can be seen.
– If a station does not broadcast RADIOTEXT, the unit switches automatically to
the frequency indication.
SWITCHING DISPLAYS
• Pressing
Ǻ
briefly switches the display (when available) between station
name (RDS or one you have entered), RDS-TIME, RADIOTEXT (with RDS
stations), and frequency.
– When the station name is displayed, only the memory location number is
displayed to the left of the name.
MHz
4 FM10300
ANT3
9 14
4
ANT3NA
MHz
1 FM 9750
MHz
2 AS 9870
©
28
RADIO
(press
TUNER
to select radio mode)
GB
