SWITCHING ON AND OFF
• When you want to switch Space Fidelity on, press the
POWER
button. The
green LED in the button indicates that the unit is on.
button depressed: POWER ON
button not depressed: POWER OFF
– The system will be activated and the source that was chosen before the
power was switched off will be selected again.
– If the system had been switched to standby before it was switched off, the
standby mode will be selected when the power is switched back on.
– When the system is switched to active mode (as described below), the
respective source will be indicated on the display.
– The sound is muted for approximately 3 seconds when it is turned on in
order to suppress disturbing initial signal noise.
• To switch off Space Fidelity press the
POWER
button again.
STAND BY
• You can switch the system to STAND BY with the
y
key on the remote
control.
– STAND BY mode is indicated by the green LED in the
POWER
button.
• When you want to switch your system on again, simply press
CD
,
TUNER
,
TAPE
or
AUX
on the remote control (or the SOURCE key on the top of your
unit).
Note:
In order to keep power consumption below 1 W a stand-by transformer has
been built in.
The choise for this option is a consequence of Grundig’s environmental policy
targeting to reduce unnecessary power consumption.
SOURCE SELECTION
• To select a listening source, press
CD
,
TUNER
,
TAPE
or
AUX
on the
remote control (or the
SOURCE
key on the top of your unit). The respective
source will be indicated on the display.
VOLUME
• The volume can be adjusted with
+
and
–
keys on the remote control.
• The volume level can also be controlled
with the
+
and
–
keys on the top of you
unit.
– The display shows the level from 0 - 63.
MUTING
• The volume can be completely muted by pressing the
ĭ
ĭ
key on the remote
control.
– This is useful, for example, if you want to take a telephone call and do not
want to be distracted by music, news, etc., from your system.
– If the muting function is used when recording a tape, this has no effect on the
subsequent recording volume level as only the speakers are muted.
The
ĭ
ĭ
indication lights up on the display when the MUTING function is
active.
• The MUTING function can be deactivated by pressing the
ĭ
ĭ
key again or by
pressing the VOLUME
+
/
-
key or any one of the input selection keys.
POWER SOUND
• With the POWER SOUND key you can switch to three sound settings as
follows:
POWER SOUND
™
FLAT
™
USER
™
POWER SOUND
.
POWER SOUND
: slightly accentuates the lower and higher frequencies
which renders a more balanced overall sound during quieter passages.
Its effectiveness depends in turn on the setting of the volume knob. The
sound is thus optimally adapted to human hearing sensitivity, which is also
dependent on the respective volume.
FLAT
: The bass and treble settings are switched to neutral. This function
merely bypasses the signal path through the bass and treble controls
ensuring that the original sound is reproduced with the highest fidelity.
ACTUAL
: you will hear the actually selected sound preset: JAZZ, DISCO,
VOCAL, USER 1, USER 2, USER 3. See description below.
DISPLAY BRIGHTNESS
The display is automatically switched to normal brightness whenever the unit is
activated.
• To adapt the display brightness, select first
SOUND CONTROL
.
• Pressing the
Ǻ
key changes the display brightness to 50%, pressing again
switches the display off.
• Press the
Ǻ
key once more to return to normal display brightness.
BASS AND TREBLE
You can individually adjust the higher and lower frequencies from the sound of
your speakers. In this way, you can compensate for surrounding acoustic
irregularities which may be caused, for example, by sound reflection behaviour
on walls with relatively large, empty surface areas, or "damping" caused by
furniture or other objects.
You can adjust the bass and treble values as follows:
• Select the
SOUND CONTROL
mode.
• Then, press the
MODE
key
• Adjust now the TREBLE value with the
3
/
4
keys and adjust the BASS value
with the
+
/
–
keys
– The display shows the selected value e.g.
8
SOUND PRESETS
The SOUND PRESETS selection mode is selected by selecting first
SOUND
CONTROL
and then the
3
/
4
keys
Space Fidelity is supplied with 3 preprogrammed sound presets:
JAZZ
,
DISCO
and
VOCAL
.
Programming user presets
You also have the possibility to program 3 sound presets yourself:
USER 1
,
USER 2
and
USER 3
.
For these three sound presets you can install different BASS and TREBLE
values:
• Adapt the BASS and TREBLE values as described above.
• Then, press
MEMORY
.
– The display shows shortly
USER 1
.
• In the same way you can store
USER 2
and
USER 3
.
Deleting a user preset:
• Select the sound preset (
USER 1
,
2
or
3
) to be deleted by pressing the
3
/
4
keys.
• Press
CANCEL
.
– The sound preset is now deleted and can not be selected anymore with the
3
/
4
keys.
VOLUME 23
©
26
OPERATION
SOUND CONTROL
GB
