1.2. Key Features of your NVR
General :
- Connectable to network cameras, network dome and encoders.
- Connectable to Grundig & third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or PSIA protocol.
- Each channel supports dual-stream.
- Up to 128/256 network cameras can be connected.
- Independent con
fi
guration for each channel, including resolution, frame rate, bit rate, image quality, etc.
- H.265, H.264, SVAC, MPEG4, and MJPEG video formats
Local Monitoring :
- Simultaneous HDMI(Trademark) and VGA outputs with up to 3840x2160 (1920x1080 for VGA & HDMI 1)
resolution.
- Multiple screen display in live view is supported, and the display sequence of channels is adjustable.
- Live view screen can be switched to group view, manual switch and automatic cycle live view are also provided,
and the interval of automatic cycle can be adjusted.
- Quick setting menu is provided for live view.
- Motion detection, video tampering, video exception alert and video loss alert functions.
- Privacy masking
- Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
- Zooming in by clicking the mouse and PTZ tracing by dragging the mouse.
HDD Management :
- Up to 16 SATA hard drives and 1 eSATA drive can be connected
- Up to 8TB hard drives are supported
- Supports S.M.A.R.T. and bad sector detection
- 8 network disks (NAS /IP SAN disks) can be connected.
- HDD group management.
- Supports HDD standby function.
- HDD property: redundancy, read-only, read/write (R/W).
- HDD quota management: a different capacity can be assigned to different channels.
- RAID (0,1,5,6,10) support
- Hot-swappable RAID storage function with up to 16 arrays
- Disk Clone function to eSATA drive
8
English
