3. Click the “(cogwheel)” button to set the type of event to be displayed in the image.
4. Click the “OK” button to
fi
nish the settings.
Full Screen Monitoring:
When an alarm is triggered, the local monitor (VGA and HDMI monitor) displays in full screen the video image
from the alarming channel configured for full screen monitoring.
If the alarms are triggered simultaneously in several channels, their full-screen images will be switched at an
interval of 10 seconds (default dwell time). A different dwell time can be set by going to Menu> Configuration>
Live View> Full Screen Monitoring Dwell Time.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.
NOTE: You must select during the “Trigger Channel” settings the channel(s) you want to create the full screen
monitoring for.
Audible Warning:
Triggers an audible beep when an alarm is detected.
Notify Surveillance Center:
Sends an exception or alarm signal to the remote alarm host when an event occurs. The alarm host refers to the
PC installed via a Remote Client.
NOTE: The alarm signal will be transmitted automatically at detection mode when the remote alarm host is
configured. Please refer to Chapter “Configuring a Remote Alarm Host” for details of alarm host configuration.
108
English
