7. After the time settings, click the „Next“ button which takes you back to the Network Setup Wizard window, as
shown below.
NOTE: For the models which have the PoE or built-in switch network interfaces, the internal NIC IPv4 address
should be configured for the cameras connecting to the PoE or built-in switch network interface of the NVR/DVR.
7. Click the „Next“ button after you con
fi
gured the network parameters, which takes you to the HDD
Management window.
8. After setting the basic network parameters, you will need to enter the advanced network parameters. Here you
can set up the ports that are used for transmission and enable UPnP and DDNS functions.
25
English
