9.7. HTTP
A HTTP Notification server can listen for notification messages by triggered events. The HTTP setting page is
shown below. Enter the HTTP details, which include server, user name, and password into the fields. <Alarm>
triggered and <Motion Detection> notifications can then be sent to the specified <HTTP> server.
Click “Save” when the setting is finished.
Please also refer to: 9.8. Application: Send HTTP notification / 9.9. Motion Detection for HTTP Notification settings.
9.8. Application (Alarm Settings)
The Video Server supports one set of alarm input and alarm output. Please make sure the alarm connections are
properly wired before starting to configure alarm related settings on this “Application” page. Please refer to the
pin definition table below for alarm system wiring.
PIN 4: GND
PIN 5: IN+
PIN 6: OUT-
PIN 7: OUT+
35
English
