Alarm Switch :
The Administrator can enable or disable the alarm function.
Alarm Type :
Select an alarm type, “Normal close” or “Normal open”, that corresponds with the alarm application.
Alarm Output :
Define the alarm output signal as “high” or “low” for the normal alarm output status according to the current
alarm application.
Triggered Action (Multi-option) :
The Administrator can specify alarm actions that will take place when motion is detected. All options are listed as
follows:
- Enable Alarm Output:
Select this item to enable alarm relay output.
- Send Alarm Message by FTP/E-Mail:
The Administrator can choose to send an alarm message by FTP and/or by E-Mail when a motion is detected.
36
English
