Please follow the procedure below for power, video and Ethernet connections of the Video Server.
Step 1:
Connect an analogue camera to the Video Server’s BNC connector. To do this, please refer to section 4.1.
Connections (Front Panel).
Step 2:
Connect the power adaptor to the Video Server’s DC Jack. To do this, please refer to section 4.1. Connections
(Rear Panel).
Step 3:
Use of Category 5 Ethernet cable is recommended for network connection; to have best transmission quality,
cable length shall not exceed 100 meters. Connect one end of an Ethernet cable to the RJ-45 connector in the
Video Server, and the other end of the cable to the network switch or PC.
NOTE: In some cases, you may need to use an Ethernet crossover cable when connecting the Video Server
directly to the PC.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
4.2. System Requirements
Personal Computer :
1.) Intel Pentium M, 2.16 GHz or Intel Core 2 Duo, 2.0 GHz
2.) 2 GB RAM or more
4
English
