English (GB)
9
5. Operation
5.1 Control panel
The Renewable Solar Inverter control panel is shown
in fig.
6
below. The control panel has four LEDs, a
digital display and nine operating keys.
Fig. 6
Control panel layout
Warning
Check all electrical connections before
powering up the system.
Warning
The heat sink becomes hot during running
and stays hot for a long time. Touching it
while it is hot will cause burns.
Caution
In case of altitudes over 1000 m, the
output current should be reduced by 10 %
for every 1500 m increase in altitude.
Note
Adjust control parameters according to the
steps indicated in this manual before the
first start.
T
M
05
44
46
24
12
Digital display control panel
Operating keys
(The function of the keys is shown in the
table below.)
Mode indicator lights (LEDs):
On
RUN
FLT (FAULT)
Ready
Indicator lights and keys
Function description
On
On indicator light
Yellow
On: Inverter is on.
Run
Run indicator light
Green
On: Inverter is running.
FLT
Fault indicator light
Red
On: System fault.
Ready
Ready indicator light
Yellow
On: System is ready to run.
Return key
Returns to previous screen in the control panel and is
used to reset faults.
Home key
Returns to home screen in the control panel.
