English (GB)
13
5.3 Quick setup parameter description
The User settings column is left blank to allow users
to write down their own input settings.
Name
Description
Factory Setting
User Setting
Motor Nom Voltage
Motor Rated Voltage
380
Motor Nom Freq
Motor Rated Frequency
50
Motor Nom Current
Motor Rated Current
Size Dependent
Current Limit
Maximum Current from
drive
Size Dependent
Motor Cos Phi
Motor Power Factor
Size Dependent
Motor Nom Power
Motor Rated Power
Size Dependent
Pump Selection
Grundfos Pump Family
SP
Min Freq Reference
Lower frequency
30
Max Freq Reference
Target frequency
50
Acceleration time
Initial ramp time
3
Deceleration time
Final ramp time
3
PV modules type
Solar panel type
sw260
Module MP Voltage
Vmp Maximum power
point voltage
31, 4 V
Series Modules No.
Number of solar panels in
series
18
Output Sinus Filter
Select in Sinuw wave filter
is used or not
No
Advanced Level PW
Password for advance
menu and service
0
Digitial inputs
Description
DI1
Start/Stop
DI2
Tank Level switch
DI3
Well Level switch
DI4
Flow switch
DI5
Flow meter (Pulsating)
DI6
AC operation
Note
After modifying the parameters in the table
above, the inverter needs to be stopped
and started again to update the
parameters.
Note
No record is made of undervoltage fault
caused by insufficient power due to low
sunlight intensity.
