Grundfos DIT-M, Installation And Operating Instructions Manual

Page: 11 / 36

English (GB)
11
Printing parameters
6.3.3 Recalling or deleting stored results
Recalling all stored results
Recall results of a selected time period
Note:
To cancel the entry, press the [Esc] key.
If you want to recall only results of one day enter, the same date
twice to determine the time period.
Recalling results of a selected "Code-No" range
Press the [Mode] key.
Press the [Shift] and [2][9] keys.
Confirm with the key.
This display appears.
To select "Baud rate", press the [Shift] and
[2] keys.
This display appears.
To select the required "Baud rate",
press the arrow keys or .
(1200, 2400, 4800, 9600, 14400, 19200)
Confirm with the
key.
Finish with the [Esc] key.
Revert to the "Mode" menu with
the [Esc] key.
Revert to the method selection with
the [Esc] key.
Press the [Mode] key.
Press the [Shift] and [3][0] keys.
Confirm with the key.
This display appears.
The stored data sets are displayed in
chronological order, starting with the latest
stored test result. To display all stored
results, press the
key.
• To print the displayed result, press the
[F3] key.
• To print all results, press the [F2] key.
• Finish with the [Esc] key.
• To display the subsequent test result,
press the arrow key .
• To display the previous test result, press
the arrow key .
If no test results are stored in the memory,
the display shows "no data".
Shift
<Printing parameter>
2:Baud rate
cancel: Esc
9
Mode
2
2
Shift
<Baud rate>
is: 19200
select
save:
cancel: Esc
:
Esc
Shift
0
Mode
3
<Storage>
display all data
Start: cancel: Esc
print: F3
print all: F2
no data
Press the [Mode] key.
Press the [Shift] and [3][1] keys.
Confirm with the key.
This display appears.
Enter the date of the first day of the required
period in the following order: year, month,
day. Example: May 14, 2009 = [Shift] +
[0][9][0][5][1][4].
Confirm with the
key.
This display appears.
Enter the date of the last day of the required
period in the following order: year, month,
day. Example: May 19, 2009 = [Shift] +
[0][9][0][5][1][9].
Confirm with the key.
This display appears.
• To display all stored results in the
selected date range, press the key.
• To print the displayed result, press the
[F3] key.
• To print all selected results, press the
[F2] key.
• Finish with the [Esc] key.
Press the [Mode] key.
Press the [Shift] and [3][2] keys.
Confirm with the key.
This display appears.
Enter the start "Code-No" (max. 6-digit),
such as [Shift] + [1].
Confirm with the
key.
This display appears.
Enter the end "Code-No" (max. 6-digit), such
as [Shift] + [1][0].
Confirm with the
key.
This display appears.
• To display all stored results of the
selected "Code-No" range,
press the
key.
• To print the displayed result, press the
[F3] key.
• To print all selected results, press the
[F2] key.
• Finish with the [Esc] key.
Shift
<Storage>
1
sorted: date
from yy-mm-dd
_ _ - _ _ - _ _
Mode
3
to yy-mm-dd
_ _ - _ _ - _ _
from 14.05.2009
to 19.05.2009
Start: cancel: Esc
print: F3
print all: F2
Shift
<Storage>
2
sorted: Code-No.
from _ _ _ _ _ _
Mode
3
to _ _ _ _ _ _
from 000001
to 000010
Start: cancel: Esc
print: F3
print all: F2