English (GB)
17
8.4.9 Battery status (1.2.7)
Fig. 15
Battery status
Description
Here you can see the status of the backup battery, if installed.
8.4.10 Pump 1 - 6, Pilot pump, Backup pump (1.3 - 1.10)
Fig. 16
Pump 1
Description
This display shows the operational state of the individual pumps.
The pumps can have different operating modes:
• Auto
– Together with the other pumps in automatic operation, the
pump is controlled by the PI controller which ensures that
the system delivers the required performance.
• Manual
– The pump is not controlled by the PI controller. In manual
operation, the pump has one of the following operating
modes:
• Max.
– The pump runs at a set maximum speed. (This operating
mode can only be selected for variable-speed pumps.)
• Normal
– The pump runs at a set speed.
• Min.
– The pump runs at a set minimum speed. (This operating
mode can only be selected for variable-speed pumps.)
• Stop
– The pump has been forced to stop.
Besides information about the operating mode, it is possible to
read various parameters in the status display, such as these:
• actual operating mode
• control source
• speed (only 0 or 100 % are shown for mains-operated pumps)
• power (only MPC-E/-EC)
• energy consumption (only MPC-E/-EC)
• operating hours.
Note
The displays for backup and pilot pump are only
shown if such pumps are installed.
