English (GB)
11
Continued from page 10
4. Settings
4.1
Primary controller
4.1.1
PI controller
4.1.2
Alternative setpoints
4.1.2.1 Alternative setpoints 2 - 7
4.1.3
External setpoint influence
4.1.3.1 Input value to be influenced by
4.1.3.2
Setting of influence function
4.1.4
Primary sensor
4.1.6
Clock program
4.1.7
Proportional pressure
4.1.8
S-system configuration
4.1.9
Setpoint ramp
4.2
Pump cascade control
4.2.1
Min. time between start/stop
Max. number of starts/hour
4.2.3
Standby pumps
4.2.4
Forced pump changeover
4.2.5
Pump test run
4.2.7
Pump stop attempt
4.2.8
Pump start and stop speed
4.2.9
Min. performance
4.2.10
Compensation for pump start-up time
4.3
Secondary functions
4.3.1
Stop function
4.3.1.1 Stop parameters
4.3.3
Soft pressure build-up
4.3.5
Emergency run
4.3.7
Digital inputs
Function, DI1 (CU 352) - DI3, [10, 12, 14]
Function, DI1 (IO 351-41) - DI9, [10 - 46]
Function, DI1 (IO 351-42) - DI9, [10 - 46]
4.3.8
Analog inputs
Setting, AI1 (CU 352), [51] - AI3, [51, 54, 57]
Function, AI1 (CU 352) - AI3 [51, 54, 57]
Setting, AI1 (IO 351-41), [57] - AI2 [57, 60]
Function, AI1 (IO 351-41) - AI2 [57, 60]
Setting, AI1 (IO 351-42), [57] - AI2 [57, 60]
Function, AI1 (IO 351-42) - A2 [57, 60]
4.3.9
Digital outputs
DO1 (CU 352), [71] is signalling - DO2 [71, 74]
DO1 (IO 351-41), [77] is signalling - DO7 [77 - 88]
DO1 (IO 351-42), [77] is signalling - DO7 [77 - 88]
4.3.10
Analog outputs
AO1 (IO 351-41) [18] - AO3 [18, 22, 26]
AO1 (IO 351-42) [18] - AO3 [18, 22, 26]
4.3.14
Min., max. and user-defined duty
4.3.14. Min. duty
4.3.14. Max. duty
4.3.14. Set user-defined duty
4.3.19
Pump curve data
4.3.23
Flow estimation
4.3.20
Control source
4.3.22
Fixed inlet pressure
4.3.23
Flow estimation
4.3.24
Reduced operation
4.4
Monitoring functions
4.4.1
Dry-running protection
4.4.1.1 Pressure/level switch
4.4.1.2 Measurement, inlet pressure
4.4.1.3 Measurement, tank level
4.4.2
Min. pressure
4.4.3
Max. pressure
4.4.4
External fault
4.4.5
Limit 1 exceeded
4.4.6
Limit 2 exceeded
4.4.7
Pumps outside duty range
4.4.8
Pressure relief
4.4.9
Log values
4.4.10
Fault, primary sensor
4.5
Functions, CU 352
Change language to the service language
Run wizard again
4.5.1
Display language
4.5.2
Units
4.5.2.1 Pressure
4.5.2.2 Differential pressure
4.5.2.3 Head
4.5.2.4 Level
4.5.2.8 Temperature
4.5.3
Date
and
time
4.5.2.5 Flow rate
4.5.2.9
Power
4.5.4
Password
4.5.2.6 Volume
4.5.2.10 Energy
4.5.5
Ethernet
4.5.2.7 Specific 4.5.6
GENIbus
number
4.5.9
Software status
