English (GB)
31
19. Servicing the product
19.1 Motor
If service is needed on the product, please contact
Grundfos Service.
19.2 Pump
Service documentation is available in Grundfos
Product Center
(http://product-selection.grundfos.com/).
If you have any questions, please contact the
nearest Grundfos company or service workshop.
20. Cleaning the product
In order to avoid condensation in the motor, let the
motor cool down before spraying it with cold water.
21. Megging
Do not meg an installation incorporating MGE motors
as the built-in electronics may be damaged.
22. Technical data, three-phase
motors
22.1 Supply voltage
Check that the supply voltage and frequency
correspond to the values stated on the nameplate.
Recommended fuse size
•
3 x 380-480 V - 10 %/+ 10 %, 50/60 Hz, PE.
22.2 Leakage current (AC)
The leakage currents are measured without any load
on the shaft and in accordance with EN
61800-5-1:2007.
23. Inputs/outputs
Earth reference
All voltages refer to earth. All currents return to
earth.
Absolute maximum voltage and current limits
Exceeding the following electrical limits may result in
severely reduced operating reliability and motor life:
Relay 1:
Maximum contact load: 250 VAC, 2 A or 30 VDC, 2
A.
GENI terminals: -5.5 to 9.0 VDC or less than 25
mADC.
Other input/output terminals: -0.5 to 26 VDC or less
than 15 mADC.
DANGER
Electric shock
Death or serious personal injury
- Switch off the power supply to the motor
and to the signal relay. Wait at least 5
minutes before starting any work on the
motor. Make sure that the power supply
cannot be accidentally switched on.
DANGER
Magnetic field
Death or serious personal injury
- Do not handle the motor or rotor if you
have a pacemaker.
WARNING
Electric shock
Death or serious personal injury
- Switch off the power supply to the motor
and to the signal relay. Check that the
terminal box cover is intact before
spraying water on the product.
Motor size
[kW]
Min.
[A]
Max.
[A]
0.25 - 1.1
6
6
1.5
6
10
2.2
6
16
3
10
16
4
13
16
5.5
16
32
Speed
[min
-1
]
Power
[kW]
Mains
voltage
[V]
Leakage
current
[mA]
2900-4000
0.25 - 2.2
≤
400
< 3.5
> 400
< 5
3 - 5.5
≤
400
< 3.5
> 400
< 3.5
