Grunbeck GENO-mat duo WE-OSMO-X 130, Operation Manual, Page: 14 / 57

Water softener
GENO-mat duo WE-X,
GENO-mat duo WE-OSMO-X
Order no. 074 184 046-inter Edited by: phar/mrie G:\BA-184046-inter_074_GENO-mat duo_WE-X.docx
14
Table C-2: Technical specifications
GENO-mat duo WE-X water softener
Systems with economy salting
50 130 230 330 530
Connection data
Nominal connection diameter DN 25
(1" female thread)
DN 40
(1½" female thread)
Min. drain connection DN 50
Power supply [V]/[Hz] 85 -250/50-60
(system operation with protective low voltage 24V DC)
Connected load [VA] 10
Protection/protection class IP 54 /I
Performance data
Nominal pressure (PN) [bar] 10
Min./max. operating pressure [bar] 2.0/8.0
Max. continuous flow
*** at a residual hardness of
>
0.1 °dH
[m³/h] 2.0 3.0 5.0 6.0 9.5
Peak flow in case of blending to 8 °dH
and a raw water hardness of 20 °dH [m³/h] 3.3 5.0 8.3 10.0 15.8
Pressure loss at max. continuous flow [bar] 0.6 1.1 2.1 1.5 2.3
K
V
value (at

p = 1.0 bar)
[m³/h] 2.6 2.7 3.1 4.5 5.6
K
V
value in case of blending to 8 °dH
and a raw water hardness of 20 ° dH
[m³/h] 4.3 4.5 5.2 7.5 9.3
Nominal capacity
[mol]
[m³x°dH]
9.5
53
20.9
117
42.3
237
60.0
336
95.2
533
Capacity per kg of regeneration salt [mol/kg] 5.27 5.22 5.22 5.20 5.90
Time capacity [m³ x °dH/h] 68 81 143 207 243
Dimensions and weights
1)
Total height [mm] 1310 1530 1790 1840 1970
Overall height (without control unit) **** [mm] 1080 1300 1560  
Exchanger tank

[mm] 208 257 334 369 469
Distance between centre of bottles [mm] 400 700
Brine tank

* [mm] 410 500 570 700 700
Overall height of brine tank * [mm] 670 810 880 870 870
Height of safety overflow on brine tank * [mm] 570 700 780 770 770
Connection height of control valve
(raw water) [mm] 940 1160 1420 1710 1830
Min. foundation depth * [mm] 500 600 700 800 800
Min. length of foundation * [mm] 1300 1500 1600 2100 2200
Approx. operating weight * [kg] 190 340 555 825 1080
Filling volumes and consumption data
**
Resin quantity [l] 18 40 81 115 200
Freeboard (resin in form of sodium), approx. [mm] 270 230 290 390 300
Salt consumption per regeneration, approx. [kg] 1.8 4.0 8.1 11.5 16.0
Max. regeneration salt supply * [kg] 65 130 190 285 285
Total waste water volume per regen., approx. [l] 98 181 376 583 865
Operating water volume [l] 5 11 23 32 44
Minimum salt fill level * [mm]     
Ambient data
Max. water temperature [°C] 30
Max. ambient temperature [°C] 40
Control unit
Order no. GENO-mat duo WE-X 186 200 186 210 186 220 186 230 186 240
* With standard brine tank
** The waste water volume and salt consumption refer to a primary pressure of 3 bar.
The indicated values change at different inlet pressures and only serve as a means for a rough determination.
*** The indicated max. continuous flows may decrease in case of high raw water hardness.
**** In case of systems with a nominal connection diameter of DN 40, the control unit is fastened between the exchanger
tanks.
1)
All indicated dimensions and weights are approximate!