Grunbeck desaliQ:MA, Operation Manual

Page: 18 / 32

Cleaning, inspection, maintenance
18 | 32
7 Cleaning, inspection, maintenance
7.1 Intervals
The following tasks must be carried out in compliance with DIN EN 806
-
5:
Task Interval Execution
Inspection 2 months Specialist installer
Maintenance 6 months Specialist installer
7.2 Cleaning
NOTE: Do not clean the product with alcohol- or cleaning agents containing solvents!
● Such substances damage components made of plastic.
► Only clean the external surfaces of the product. Do this using a cloth moistened
in water.
7.3 Inspection
► Check the mixed-bed cartridge and the connections for leaks.
► Lubricate the seal in the lid using silicone grease or silicone spray.
7.4 Maintenance
► Check the mixed-bed cartridge and the connections for leaks.
► Lubricate the seal in the lid using silicone grease or silicone spray.
► Check the measurement accuracy of the conductivity meter.