Grunbeck desaliQ:MA, Operation Manual

Page: 15 / 32

Start-up
15 | 32
5 Start-up
5.1 Preparations
► Make sure that the resin bag has been fitted correctly: Seam parallel with the rim
of the container, tear-off sticker facing upwards.
5.2 How to start up the product
1. Slowly increase the water supply.
2. Press the green lever to bleed the mixed-bed cartridge.
3. Leave all valves open.
4. Switch on the conductivity meter.
» 000 should appear on the display.
5. Replace the resin as soon as the desired limit value is shown on the display.
(We recommend a max. of 50 µS/cm)
The conductivity meter switches off automatically after approx. 10 minutes.