4.4.3 Multiple add/delete devices
If the address of a kind of equipment continuously, can one-time added or delete.
As shown below:
(1) Add 10 inverter
(2) Enter the page of "Device status" confirm whether equipment added successfully.
(2) Both add and remove devices, select "DEL".
Add and delete device:
When you need delete a device, all the options should be the same with the momemet
you add this device like: 485 channel, device type, address, if you are not sure about this
you can check the device status first.
2. When one address is occupied, you cannot just paste the new device, you have to delete
the old device and use this address.
1.
4.5 Baud Rate Setting
The Default two channels’ Baud Rate are both 9600, you can choose the Baud Rate for
different scenarios.
Choose the Baud rate at the “Baud rate setting ”Bar.
Choose the corresponding chanels RS485_1 or RS485_2.
Set the Baud rate to 9600 as RS485_1
(1)
(2)
16
17
Fig 4-8
Fig 4-9
Fig 4-10