23
18.
Disconnect the chains.
15.
Disconnect the hydraulic multi-coupler and
remove the cover from the parking station.
16.
Connect the hydraulic multi-coupler to the
parking station (7).
17.
Install the hydraulic multi-coupler cover on the
base on the undercarriage (8).
19.
Back away from the loader.
NOTE:
Never play on or around the loader.
Maintenance Stand
NOTE:
Always engage the maintenance stand before any adjusting or maintenance is done on the loader or tractor.
NOTE:
Some parts are not shown for clarity.
2.
Raise the loader until the maintenance stand engages
the tube support on the undercarriage.
4.
Place tractor in park, set the parking brake and
shut off the engine.
3.
Lower the loader until the maintenance stands
are on the tube support on the undercarriage (2).
5.
After loader maintenance is complete, raise the
loader, place the tractor in park, set the parking
brake, and shut off the engine.
6.
Raise the maintenance stand and install the
maintenance stand pin to secure the stand (1).
7
8
1
2
1.
Remove the maintenance stand pin to lower the stand
on both sides (1).
Summary of Contents for 10204424
Page 6: ...6 Safety Decals ...
Page 7: ...7 ...
Page 31: ...31 18 11 1 3 10 9 11 2 8 6 7 16 19 17 20 ...
Page 35: ...35 Notes ...