Grouser Products 10204424, Manual

Page: 22 / 36

22
Detaching Loader
1. Raise the loader enough to deploy the parking
stand.
2. Place tractor in park, set the parking brake and
shut off the engine.
3. Remove the locking pin (1) from the parking
stand pin.
4. Pull the parking stand pin and position the
handle into the notch provided on the shoe brace to
keep the pin disengaged (2).
5.
Lift the shoe stand and brace to release the pin
from the bottom slot and help guide it up until the
pin engages at the top (3).
6. Install the locking pin (4) into the parking stand
pin.
7. Follow Steps #3-6 for the opposite side.
8. Remove the loader locking pins (5) and
remove the hoses from behind the hook (6).
10.
Lower the loader until the blade stands are
both on the ground.
11. Pitch the attachment forward until level.
12. Retract the lift cylinders to lower the boom
until the pins on the mount frame disengage from
the undercarriage receiving hooks.
13. Back the tractor up until mount frame is
disengaged. Chains are there for safety.
14. Install the loader locking pins back into the
mount frame.
9. Verify that the chains are still attached to
the undercarriage and mount frame.
1
2
3
4
Note:
• Only detach the loader on a solid and level
surface.
• Always leave the attachment connected when
detaching the loader.
• If necessary, use additional blocking for
detaching the loader.
6
5