![Grizzly T33300 Owner'S Manual Download Page 28](http://html1.mh-extra.com/html/grizzly/t33300/t33300_owners-manual_2267897028.webp)
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
-26-
Model T33300 (Mfd. Since 04/22)
SECTION 6: MAINTENANCE
For optimum performance from this tool, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
tool operation, shut down the tool immediately if
you ever observe any of the items below, and fix
the problem before continuing operations:
•
Damaged saw blade.
•
Worn or damaged wires.
•
Any other unsafe condition.
Daily Maintenance
•
Inspect saw blade and riving knife for dam-
age, dullness, or excessive wear.
•
Inspect base plate for defects and flatness.
•
Verify fasteners on moving parts are secure.
Weekly Check
•
Clean/vacuum dust buildup from tool housing
and motor.
•
Inspect wiring connections for loose wires.
Schedule
Cleaning the Model T33300 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.
Cleaning &
Protecting
All rotating parts within the track saw are pre-lubri-
cated and sealed. DO NOT attempt to lubricate
the track saw or saw blade. The Model T33300
requires dry conditions for proper use.
Note: Lubrication can cause sludge build-up that
will bind moving parts.
Lubrication
Summary of Contents for T33300
Page 36: ......