Figure 21. Adjustable stops on guide rail.
Figure 22. Stabilizer clipped over guide rail.
Figure 23. Stabilizer on guide rail.
-24-
Model T33300 (Mfd. Since 04/22)
The stabilizer (not included with the Model
T33300) attaches to the base plate and clips onto
the guide rail to help prevent the saw from acci-
dentally derailing (see
Figure 22).
The adjustable stops (not included with the Model
T33300) attach to the guide rail and are posi-
tioned in front of the saw body (see
Figure 21).
The adjustable stops fit on the outer rail of the
guide rail and provide a stable stopping point
along the length of the guide rail, which is espe-
cially useful when making plunge cuts.
Using Adjustable
Stops
Using Stabilizer
Adjustable Stops
Base Plate
Guide Rail
Stabilizer
To position the stabilizer against the guide rail,
loosen the thumb screw and adjust the outer lip of
the stabilizer around the outside of the guide rail
(see
Figure 23). Tighten thumb screw once the
stabilizer lip is in place.
When not in use, remove the stabilizer from the
saw base plate. The stabilizer rests slightly lower
than the saw base plate and could affect the angle
of the blade to the workpiece when not attached
to the guide rail.
Stabilizer
Summary of Contents for T33300
Page 36: ......
