Model T30945 (Mfd. Since 12/19)
-15-
9. Place rip fence on table to left of blade so
indicator lines up with table scale (see
Figure
10), then secure by pushing lock lever down.
8. Install bevel table.
Site Considerations
Figure 12. Minimum working clearances.
23"
24"
= Electrical Connection
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Workbench Load
Refer to the
Machine Data Sheet for the weight
and footprint specifications of your machine.
Some workbenches may require additional rein-
forcement to support the weight of the machine
and workpiece materials.
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this machine in the shop. Below is
the minimum amount of space needed for the
machine.
Placement Location
10. Push miter guide onto rip fence with miter
angle facing blade (see
Figure 11).
Figure 10. Rip fence attached to table.
Rip Fence
Lock Lever
Figure 11. Miter guide attached to rip fence.
Miter Guide
Rip Fence
Indicator
Table Scale
Summary of Contents for T30945
Page 40: ......
