-12-
Model G4176 (Mfg. Since 8/97)
inventory
box inventory (Figures 3 & 4)
Qty
a. Elbow Joint assembly ................................ 1
b. power Feeder assembly ............................ 1
c. arm assembly ............................................ 1
D. Column assembly ...................................... 1
E. handles ...................................................... 2
F. Crank arms ................................................ 2
G. Base Bolt pattern template ........................ 1
H. Base assembly ........................................... 1
i. Change gear set, 26/24-tooth................... 1
Figure 3. power feeder inventory.
Figure 4. Base inventory.
C
E
d
F
g
h
i
a
B
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
