-24-
Model G4176 (Mfg. Since 8/97)
if you damage one or more wheels or they are
worn, you can easily replace the wheels.
tools Needed
Qty
•
hex Wrench 5mm ....................................... 1
Wheel Replacement
always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Figure 25. Wheel replacement.
Cap
screw
2. Using a 5mm hex wrench, remove the two
wheel retaining cap screws (
see Figure 25).
3. swap the old wheel with the new.
4. reinstall the two cap screws, and tighten in
an alternating pattern until the wheel is sec-
cure
.
to replace a wheel:
1. disCoNNECt MaChiNE FroM poWEr!
