-18-
Model G4176 (Mfg. Since 8/97)
SEctiON 4: OPERatiONS
basic use & care
power feeders reduce kickback hazards and
improve cutting results by feeding in a consistent
and stable manner. remember, do not to stand in
the path of potential kickback.
When not in use, support the power feeder with
a wooden block so the rubber wheels are raised
above the table and do not compress from the
weight of the power feeder.
the universal joints on this power feeder allow
you to adjust the power feeder tracking and height
to accommodate many workpiece sizes. Before
loosening any lock lever, always support the
power feeder with a block of wood, so the power
feeder does not drop and cause damage.
adjust the power feeder so it is toed-in approxi-
mately 1° to 1.5° degrees towards the machine
fence. this adjustment ensures the power feeder
wheels slightly push the workpiece against the
fence during cutting operations (
see Figure 8 on
Page 15). a featherboard may be used on the
infeed side to assist with feeding long or large
stock.
Next, adjust the power feeder so the rubber
wheels are parallel with the table surface, and are
1
⁄
8
"
lower than the thickness of your workpiece.
this adjustment ensures that the workpiece will
not slip or hang in the middle of a cut. always
double check that the power feeder wheels are
1
⁄
8
"
lower than the workpiece before you begin feed-
ing operations. otherwise, the workpiece may slip
and kickback.
you MuSt assemble all guards, fences,
and hold-downs before starting your
machine or power feeder. Failure to heed
this warning could result in amputation or
death!
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
to reduce your risk of
serious injury, read this
entire manual bEFORE
using machine.
to reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
if you are not experienced with this type
of machine, WE StRONGLy REcOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly industrial will not be held liable
for accidents caused by lack of training.
