Model G0936 (Mfd. Since 06/21)
-3-
Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Identification
For Your Own Safety Read Instruction Manual Before Operating Sander
a) Wear eye protection.
b) Support workpiece with miter gauge or worktable.
c) Maintain
1
⁄
16
in. maximum clearance between table and sanding belt.
Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, seri-
ous personal injury may occur.
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to do so could result in
serious personal injury, damage to equip-
ment, or poor work results.
Table
Cabinet
Door
Sanding
Belt
Belt Tension
Lock Handle
ON/OFF
Buttons
Platen Tilt
Handwheel
Platen Tilt
Angle Scale
4" Dust
Port
Belt Tension
Handwheel
Sanding Belt Cover
Lock Knob
(1 of 2)
Electrical
Box
Platen
Sanding Belt
Cover
Summary of Contents for G0936
Page 52: ......
