Model G0936 (Mfd. Since 06/21)
-25-
SECTION 6: MAINTENANCE
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged or worn sanding belt.
•
Worn or damaged wires.
•
Any other unsafe condition.
Weekly Maintenance
•
Clean/protect table.
•
Clean shavings and dust from between plat-
en and belt.
•
Sweep or vacuum dust and shavings from
inside belt compartment.
Monthly Check
•
V-belt tension, damage, or wear.
•
Clean/vacuum dust buildup from inside cabi-
net and off motor.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning the Model G0936 is relatively easy.
Vacuum excess sawdust, and wipe off the remain-
ing dust with a dry cloth. If any resin has built up,
use a resin dissolving cleaner to remove it.
Protect the unpainted cast iron table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9 (see
Figure 25).
Cleaning &
Protecting
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 Oz. Spray
G2871—Boeshield
®
T-9 12 Oz. Spray
G2870—Boeshield
®
T-9 4 Oz. Spray
H3788—G96
®
Gun Treatment 12 Oz. Spray
H3789—G96
®
Gun Treatment 4.5 Oz. Spray
Figure 25. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.
Summary of Contents for G0936
Page 52: ......
