Grizzly G0923 Owner'S Manual Download Page 47

Page: 47 / 56

Model G0923 (Mfd. Since 05/20)

-45-

Updating Firmware

If essential operating updates are made to the
G0923 firmware, the updated firmware will be
available at www.grizzly.com on the G0923 prod-
uct page.

Tools Needed

Qty

Windows Computer with Grizzly Winware ......... 1
USB Type B Cable ............................................ 1

To update firmware:

1. On computer, download latest firmware

update from www.grizzly.com.

Note: Firmware files will have the ".HEX" file
extension.

2. Connect printer to computer using type B

USB cable.

3. Open Grizzly Winware software, select active

printer, then navigate to "Manage Printers"
(see

Figure 66). Printer preferences window

will open.

4. Highlight correct printer, then select Upgrade

Firmware (see

Figure 67). Upgrade Firmware

window will open.

5. Select Upload Custom Firmware (see Figure

68). A file selection window will open.

6. Within file selection window, navigate to

.HEX file downloaded in

Step 1. Highlight file

and select "Open." A progress bar will show
installation progress.

7. Once installation is complete, disconnect

printer from computer.

Figure 68. Upgrade Firmware window.

Figure 66. Active printer menu.

Manage Printers

Active Printer

Figure 67. Printer preferences window.

List of Printers

Upgrade Firmware

Button

Upload Custom

Firmware

Summary of Contents for G0923

























































Search results

Summary of Contents for G0923

Reviews:

Related manuals for G0923

Brands by name

Popular brands

Grizzly G0923, Owner'S Manual

Search results

Summary of Contents for G0923

Reviews:

Related manuals for G0923

Brands by name

Popular brands