Grizzly G0923 Owner'S Manual Download Page 19 | Manualshive

Page: 19 / 56

background image

Model G0923 (Mfd. Since 05/20)

-17-

Test Run

Installing Software

Once assembly is complete, test run the machine
to ensure it is properly connected to power and
safety components are functioning correctly.

If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from
power, and fix the problem BEFORE operating the
machine again. The

Troubleshooting table in the

SERVICE section of this manual can help.

To test run machine:

1. Clear all setup tools away from machine.

2. Connect machine to power supply.

3. Press switch on power adapter to turn

machine

ON.

4. Press control dial to enter main menu, then

navigate to "Auto Home." Verify that the X-,
Y-, and Z-axis motors operate smoothly and
that all axes move to machine zero.

The Test Run consists of verifying the following: 1)
The machine powers up correctly, and 2) the axis
motors run correctly and the machine properly
homes.

Injury or product damage can result from

using this machine BEFORE understanding

its controls and related safety information.

DO NOT operate, or allow others to operate,

machine until the information is understood.

To install slicer software:

1. Insert SD card into USB adapter, then insert

adapter into PC.

2. On the SD card, navigate to and open .EXE

installation file.

3. Follow directions in installation wizard.

4. When opening the software for the first time,

select Model G0923 as the default printer.

Note: We recommend backing up the installation
files by copying them from the included SD card to
a location on your computer. If installation files are
lost, they can also be downloaded from the G0923
product page at www.grizzly.com.

Grizzly Winware slicer software is included on the
SD card that comes with the Model G0923.

DO NOT start machine until all preceding

setup instructions have been performed.

Operating an improperly set up machine

may result in malfunction or unexpected

results that can lead to injury, poor work

results, or machine/property damage.

«
...
17
18
19
20
21
...
»

Summary of Contents for G0923

























































Reviews:

No comments

Related manuals for G0923

Brand: Oki Pages: 104

Brand: Oki Pages: 108

Brand: Oki Pages: 2

Brand: Oki Pages: 94

Brand: Oki Pages: 135

Brand: Oki Pages: 97

Brand: Oki Pages: 280

Brand: Oki Pages: 123

Pacemark PM4410

Brand: Oki Pages: 144

Pacemark PM4410

Brand: Oki Pages: 28

EasyCoder 501 SA

Brand: UBI Pages: 214

Brand: UBI Pages: 64

Brand: Xerox Pages: 15

Brand: Xerox Pages: 9

DocuPrint 180 NPS Series

Brand: Xerox Pages: 172

Brand: Xerox Pages: 11

Brand: Xerox Pages: 8

Brand: Xerox Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands